Skip to product information
1 of 1

Arduino UNO SMD with Cable

Arduino UNO SMD with Cable

SKU SKU Code: # AQ54

Tax included. Shipping calculated at checkout.

In stock

View full details

Description

Its Arduino UNO SMD with Cable, Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins, 6 Analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller that simply connects it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Arduino Uno is the successor to the Arduino Duemilanove which is a microcontroller board based on a removable, dual-inline-package (DIP) ATmega328 AVR microcontroller.

Cable:  This is a Cable For Arduino UNO/MEGA (USB A to B)-1feet, you can use it to connect Arduino UNO or any board with the USB female A port of your computer. Length is approximately 52 cm. Cable color and shape may vary slightly from image as our stock rotates. This is a standard-issue USB 2.0 cable. the kind that’s usually used for printers, Arduino, etc. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.

Pin Configuration

D0 (Rx) & D1 (Tx)   Used to receive and transmit TTL serial data
D2 & D3 These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value
D3, D5, D6, D9, D10, D11 Provide 8-bit PWM output with the analogWrite() function
D11 (MOSI), D12 (MISO) & D13 (SCK) These pins support SPI communication
A4 (SDA) & A5 (SCL)  Support I2C (TWI) communication using the Wire library
AREF Reference voltage for the analog inputs
Reset Bring this line LOW to reset the microcontroller

 
Features

  • Automatic reset during program download
  • Power OK blue LED
  • Green (TX), red (RX), and orange (L) LED
  • Auto-sensing/switching power input
  • Small mini-B USB for programming and serial monitor
  • ICSP header for direct program download
  • Standard 0.1” spacing DIP (breadboard friendly)
  • Manual reset switch 
Specifications
Microcontroller ATmega328P
Operating Voltage 5 V
Input Voltage(Recommended) 7-12V
Input Voltage(Limit) 6-20V
Analog I/O pins 6
Digital I/O pins 14
PWM Digital I/O pins 6
DC current per I/O pin 40 mA
Clock Speed 16 MHz
SRAM 2 KB
Flash Memory 32 KB
EEPROM 1 KB

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)