ICs
Texas Instruments UCC3818 BiCMOS Power Factor...
UC3843B SMD IC – High-Performance Current Mod...
CD4053 Triple 2-Channel Multiplexer/Demultipl...
MC1455DR2G – Precision Timer IC (SOIC-8)
FP6291 AL SOT23-6 DC-DC Boost Converter IC
TNY268 Power Integrations Off-line Switcher IC
ATMEGA8535 8-bit AVR RISC-based Microcontroller
93C46 3 Wire 1kb Serial EEPROM SMD
Texas Instruments UCC3818 BiCMOS Power Factor...
ACS712-30 5V 30A Hall-Effect-Based Current Se...
VP3082 Low Power RS-485 Transceiver (Pack of ...
MAX487 low-power RS-485/RS422 Transceiver IC ...
TLE6250G High Speed CAN-Transceiver IC (Pack ...
24C04 4kb Two Wire Serial EEPROM IC (Pack of ...
24C02 2Kb Two-Wire Serial EEPROM (Pack of 500)
- Sale -10%
Texas Instruments UCC3818 BiCMOS Power Factor Pregulator IC (16 Pin)
The UCC3818 functions as an active power factor-corrected pre-regulator. The controller achieves a near-unity power factor by shaping the AC input line current waveform to correspond to that of the AC input line voltage. Average current mode...
WIZnet W5500 Hardwired TCP/IP Ethernet Controller IC
The WIZnet W5500 is a high-performance Hardwired TCP/IP Ethernet controller designed to simplify network connectivity in embedded systems. It integrates a full-featured TCP/IP stack, 10/100 Ethernet MAC, and PHY, reducing the burden on the host...
- Sale -10%
UC3843B SMD IC – High-Performance Current Mode PWM Controller
The UC3843B is a high-performance fixed frequency current-mode PWM controller ideal for off-line and DC-to-DC converter applications. It offers enhanced speed and stability, enabling efficient power management in various switching power supply designs. Its SMD...
- Sale -44%
CD4053 Triple 2-Channel Multiplexer/Demultiplexer IC
The CD4053 is a CMOS analog multiplexer/demultiplexer IC featuring three independently controllable analog switches, each configured as a single-pole double-throw (SPDT) switch. This design allows for efficient routing of analog or digital signals in various...
- Sale -5%
MC1455DR2G – Precision Timer IC (SOIC-8)
The MC1455DR2G is a precision timer IC, widely used in monostable and astable multivibrator circuits for timing, pulse generation, and delay applications. It is functionally similar to the NE555 timer but offers improved stability and...
FP6291 AL SOT23-6 DC-DC Boost Converter IC
The FP6291 is a high-efficiency synchronous step-down DC-DC converter designed to provide a regulated output voltage from a wide input voltage range. It is optimized for Applications that require a low standby current and high...
- Sale -15%
TNY268 Power Integrations Off-line Switcher IC
The TNY268 integrates a 700 V power MOSFET, oscillator, high voltage switched current source, current limit, and thermal shutdown circuitry onto a monolithic device IC. The start-up and operating power are derived directly from the voltage...
ATMEGA8535 8-bit AVR RISC-based Microcontroller
The high-performance, low-power Microchip 8-bit AVR RISC-based microcontroller combines 8 KB of programmable Flash memory, 512B SRAM, 512B EEPROM, and an 8-channel 10-bit A/D converter. The device supports a throughput of 16 MIPS at 16...
- Sale -13%
93C46 3 Wire 1kb Serial EEPROM SMD
The 93C46 is an EEPROM (electrically erasable programmable read-only memory). The device is designed with a variety of industrial and commercial Applications in mind, where low-power and low-voltage functioning are crucial. To understand how it...
- Sale -5%
Texas Instruments UCC3818 BiCMOS Power Factor Regulator IC (Pack of 100)
The UCC3818 functions as an active power factor-corrected pre-regulator. The controller achieves a near-unity power factor by shaping the AC input line current waveform to correspond to that of the AC input line voltage. Average current mode...
- Sale -5%
ACS712-30 5V 30A Hall-Effect-Based Current Sensor IC (Pack of 100)
ACS712-30 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. The Hall IC transforms the magnetic field created by the applied current flowing via...
- Sale -10%
VP3082 Low Power RS-485 Transceiver (Pack of 100)
For RS-485 data bus networks, this device is a half-duplex transceiver. It completely complies with the TIA/EIA-485A standard and is powered by a 5-V supply. This device is appropriate for signaling rates up to 200...
- Sale -13%
MAX487 low-power RS-485/RS422 Transceiver IC (Pack of 100)
The MAX487 is a low-power transceiver for RS-485 and RS422 communication. One driver and one receiver are present in each component. The MAX487 has decreased slew-rate drivers that reduce reflections from incorrectly terminated cables and...
- Sale -16%
TLE6250G High Speed CAN-Transceiver IC (Pack of 100)
The HS CAN-transceivers of the TLE6250 family are monolithic integrated circuits and they are optimized for high speed differential mode data transmission in automotive Applications and industrial Applications. The TLE6250 is designed to withstand the...
- Sale -15%
24C04 4kb Two Wire Serial EEPROM IC (Pack of 500)
The 24C04 provides 4096 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 512 words of 8 bits each .The device is optimized for use in many industrial and commercial Applications where...
- Sale -5%
24C02 2Kb Two-Wire Serial EEPROM (Pack of 500)
The 24C02 has a total of 2048 bits of serial electrically erasable and programmable read-only memory (EEPROM), which is divided into 256 words of 8 bits each. The device is designed for a variety of...
